Leave Your Message
Explore our precision-engineered fastener series designed for high-load, corrosive, and safety-critical environments.
Carriage bolts — also known as coach bolts — are uniquely designed fasteners featuring a smooth, dome-shaped head and a square shank beneath it. This geometry prevents rotation during tightening, making them indispensable in applications where vibration, dynamic load, and environmental exposure are constant challenges.
In rigging and lifting operations, every fastener must withstand tensile forces, shear loads, and cyclical stress without failure. Carriage bolts manufactured from A4-80 grade 316 stainless steel or hot-dip galvanized carbon steel deliver the mechanical strength and corrosion resistance demanded by offshore platforms, port cranes, and industrial hoisting systems.
Marine environments present one of the most aggressive corrosion challenges in engineering. Salt spray, tidal immersion, and biofouling accelerate metal degradation — and only properly specified, surface-treated carriage bolts can maintain structural integrity over extended service cycles. JGD® carriage bolts are tested to ASTM B117 salt spray standards and comply with ISO 3506 for stainless steel fastener performance.
The distinctive square neck locks into timber, composite, or metal substrates — eliminating spinning during torque application, a critical safety requirement in rigging hardware assembly.
Molybdenum-enhanced 316 SS provides superior chloride resistance versus standard 304 grade, making it the preferred specification for all submerged or splash-zone marine fastening.
The global industrial fastener market exceeded USD 100 billion in 2023, with marine and rigging-grade specialty fasteners representing one of the fastest-growing segments.
The global offshore wind capacity is projected to reach 380 GW by 2032. Every turbine foundation, transition piece, and cable management system requires thousands of marine-grade carriage bolts certified to DNV or Bureau Veritas standards. This sector alone is driving double-digit annual demand growth for corrosion-resistant fasteners.
Global shipbuilding output surpassed 100 million gross tons in 2023. Dock fenders, mooring cleats, deck fittings, and crane rail systems all rely on carriage bolts for tamper-resistant, anti-rotation fastening. Port automation projects further amplify demand for high-specification marine fasteners.
Industrial overhead cranes, gantry systems, and rigging hardware assemblies require fasteners rated to specific working load limits (WLL). Carriage bolts with traceable material certifications and mechanical test reports are increasingly mandated by OSHA, CE, and ISO 4309 compliance frameworks.
Industry 4.0 is reshaping fastener procurement. Buyers now demand QR-coded traceability, digital mill certificates, and batch-level mechanical data. JGD® assigns unique traceability codes from raw material furnace number through heat treatment to final shipment — meeting the most stringent quality audit requirements.
From offshore platforms to inland waterway vessels, carriage bolts perform critical structural roles across diverse industrial environments.
Subsea and topside structures demand fasteners with H2S resistance, cathodic protection compatibility, and NACE MR0175 compliance. Carriage bolts in Duplex or Super Duplex stainless steel are specified for riser clamps, conductor guides, and deck grating in Zone 1 hazardous areas.
Overhead crane runway rails, trolley frames, and hook block assemblies use carriage bolts to prevent fastener rotation under dynamic shock loads. Grade 8.8 and 10.9 carriage bolts with full traceability are standard in EN 13001 and ASME B30.2 compliant lifting equipment.
Deck hardware including cleats, chocks, fairleads, and stanchion bases require fasteners that resist galvanic corrosion when mated with aluminum or GRP structures. 316L carriage bolts with PTFE-coated threads prevent galling and ensure reliable removal during maintenance cycles.
Floating pontoons, marina berths, and tidal structures experience continuous wet-dry cycling and biological fouling. Hot-dip galvanized carriage bolts to ASTM A153 or 316 SS to ASTM F593 are the industry-standard specification for timber and composite dock decking connections.
Offshore wind monopile transition pieces, wave energy converters, and tidal turbine support frames use carriage bolts in high-fatigue, cathodically protected environments. Hydrogen embrittlement resistance and CTOD-tested material grades are increasingly specified by energy majors.
Temporary works, formwork, and scaffold tube-and-coupler systems rely on carriage bolts for tamper-evident, anti-vandal connections. HDG carriage bolts with standard square necks provide rapid installation and reliable clamping in construction site environments.
JGD® carriage bolts are manufactured to DIN 603, ASME B18.5, and ISO 8677 standards, with material grades from 4.6 carbon steel through A4-80 stainless steel. Every batch ships with EN 10204 3.1 material certificates, mechanical test reports, and optional third-party inspection. Our engineering team provides free specification review and application-specific material recommendations — contact us to discuss your rigging, lifting, or marine fastening requirements.
Six core capabilities that set JGD® apart in the global industrial fastener supply chain.
We maintain a stock of thousands of tons of carbon steel, stainless steel, and alloy steel fasteners.
Supports non-standard development in terms of size, head shape, tooth shape, surface treatment, and material grade.
For special working conditions such as high vibration, corrosion, and high temperature, we assist customers in optimizing fastening solutions.
From raw material furnace number to heat treatment curve, and finally to the final shipment report, each batch of products is assigned a unique traceability code.
Integrating dedicated line and express resources, supporting LCL shipments, small packages, full pallets, and export palletizing.
For clients with annual framework agreements, we offer VMI (Vendor Managed Inventory) solutions.
We focus on innovative fastening solutions, delivering tailored products — from standard to fully customized — to meet your specific needs. Our engineering team precisely addresses diverse application requirements, leveraging an integrated smart manufacturing platform to achieve end-to-end synergy, significantly reduce decision-making costs, and enhance delivery efficiency and product quality.
Discuss product requirements (including specifications and standards, materials and performance, surface treatment, etc.)
Develop the fastener structure and appearance based on product specifications (dimensions and materials).
Choose carbon steel, alloy steel, stainless steel and other special materials.
Create product machining and process prototypes.
Mechanical property / accuracy testing / process verification and special performance testing.
Mass production of fastener products.
Arrange the shipment of fastener products (emphasizing safe transportation).
Optimize fastener design, materials, or processes based on feedback.
Need to modify a standard part? It's simple. With JGD®'s standard part modification service, you receive the same quality and technical support as a fully customized product.
Modifications are flexible: adjust fastener length, change thread size, modify head height, or switch materials. We respond quickly to help you achieve personalized requirements at lower cost and with shorter lead times.
Request a quote today and obtain prototype samples.
Note: Each order has a minimum order quantity.
If standard part modifications still fall short of your requirements, you are welcome to collaborate with our application engineering team to obtain a fully customized JGD® fastening solution.
Discuss your most challenging application issues with our engineers and work together to design innovative, intelligent custom fasteners that meet your specific needs. Your vision, we bring to life together.
At JGD®, we offer more than just standard products. Leveraging our in-house manufacturing capabilities, we produce custom components to meet your requirements. With the expert support of our engineering team, you can quickly achieve the ideal solution for your special component challenges — whether precision-machined assemblies, high-volume OEM fasteners, or high-reliability bolts for rigging, lifting, and marine use.
Complete your fastening system with our full range of corrosion-resistant, high-strength hardware.
