Our stainless steel wire rope clips (also known as wire rope clamps / cable clamps / bulldog grips) are manufactured from AISI 304/316 stainless steel or Q235 carbon steel, with strength grades covering A2‑70 (304), A4‑80 (316) and carbon steel grades 4.8/8.8. The classic U‑bolt + saddle plate design accommodates wire rope diameters from 2mm to 60mm, complying with GB/T 5974, DIN 741, EN 13411‑5, RR‑C‑271 and other international standards. These clips are specifically developed for lifting & hoisting, marine & offshore, outdoor cable structures, and industrial equipment. The 316 stainless steel variant resists chloride corrosion (salt spray test ≥720h), ensuring long‑term safety in submerged or humid environments.
Easy installation: Form an eye loop with the wire rope, insert the loop into the U‑bolt, fit the saddle plate, and tighten the nuts evenly – typically the first nut is placed closest to the rope eye, followed by sequential tightening. Finally perform a load test to verify no slippage. The anti‑vibration & anti‑loosening design combines controlled preload and a serrated saddle plate.
